The Psychology of Management by L. M. Gilbreth (best large ebook reader .txt) 📕

Duties of the Disciplinarian. — The Disciplinarian keeps a record of each man's virtues and defects; he is in position to know all about the man; where he comes from; what his natural and acquired qualifications are; what his good points, possibilities and special fitness are; what his wages are, and his need for them. All that it is possible for the managers to know of the men is to be concentrated in this disciplinarian. He is, in practice, more the counsel and advocate of the worker than an unsympathetic judge, as is indicated by the fact that his chief function is that of "diplomat" and "peacemaker." His greatest duty is to see that the "square deal" is meted out without fear or favor to employer or to employé.

Importance of Psychology in Disciplining. — Not only does the position of disciplinarian under Scientific Management answer the psychological requirements for such a function, but also the holder of the position of disciplinarian must understand psychology and apply, at least unconsciously, and preferably consciously, the known laws of psychology, if he wishes to be successful.

The disciplinarian must consider not only what the man has done and the relation of this act of his to his other acts; he must also investigate the cause and the motive of the act, for on the cause and motive, in reality, depends more than on the act itself. He must probe into the physical condition of the man, as related to his mental acts. He must note the effect of the same kind of discipline under different conditions; for example, he must note that, on certain types of people, disciplining in the presence of other people has a most derogatory effect, just as rewards before people may have a most advantageous effect. Upon others, discipline that is meted out in the presence of other people is the only sort of discipline which has the desired effect. The sensitiveness of the person to be disciplined, the necessity for sharp discipline, and for that particular sort of discipline which may require the element of shame in it, must all be considered. He must be able to discover and note whether the discipline should be meted out to a ringleader, and whether the other employés, supposed to be blameworthy, are really only guilty in acquiescing, or in failing to report one who has really furnished the initiative. He must differentiate acts which are the result of following a ringleader blindly from the concerted acts of disobedience of a crowd, for the "mob spirit" is always an element to be estimated and separately handled.

Inadequacy of Terms in Disciplining. — The words "disciplinarian" and "punishment" are most unfortunate. The "Disciplinarian" would be far better called the "peacemaker," and the "punishment" by some such word as the "adjustment." It is not the duty of the disciplinarian to "take out anybody's grudge" against a man; it is his duty to adjust disagreements. He must remember constantly that his discipline must be of such a nature that the result will be for the permanent best interests of the one disciplined, his co-workers, his associates and his family.

The aim is, not to put the man down, but to keep him up to his standard, as will be shown later in a chapter on Incentives. If the punishment is in the form of a fine, it must not in any way return to the coffers of the management. The fines collected — even those fines collected from the individuals composing the management, should go in some form to the benefit of the men themselves, such, for example, as contributions to a workman's sick benefit fund or to general entertainment at the annual outing of employés. In practice, the disciplinarian is rather the friend of the worker than of the employer, if the two interests can possibly be separated. Again "penalty" is a bad word to use. Any words used in this connection should preferably have had taken from them any feeling that personal prejudice affects the discipline. It is the nature of the offense itself which should prescribe what the outcome of it shall be.

The position of disciplinarian requires a man who has a keen sense of justice, who has had such experience as to enable him to smooth out difficulties until all are in a frame of mind where they can look upon their own acts and the acts of others calmly. He must be able so to administer his duties that each decision inspires the realization that he acted to the best of his knowledge and belief. He must be one who is fearless, and has no tendency to have favorites. He must have a clear knowledge of the theories and principles of Scientific Management, in order that he can fill the position of enforcer of its laws.

The Gang Boss. — The duties of The Gang Boss are to see that the worker has plenty of work ahead, to see that everything that he will need with which to do the work is at hand, and to see that the work is actually "set," or placed and performed correctly. This position calls for a practical demonstrator, who must himself be able and willing actually to prepare and help on the work. It calls particularly for a man with teaching ability, with special emphasis on ability to teach, with great exactness, the prescribed method and to follow the orders of the planning department implicitly.

The Speed Boss. — The speed boss is responsible for the methods of doing work with machinery. He has charge of overseeing the work, and teaching the worker, during the entire time that the work is being done. He must be prepared constantly to demonstrate at any time not only how the work is done, but also that it can be done in the specified time called for in order to earn the bonus. This position calls for a man who is able, personally, to carry out the detailed written orders of the instruction card in regard to speeds, feeds, cuts, methods of operation, quality and quantity.

He must be proficient at the art of imparting his knowledge to other workmen, and at the same time be able to secure the prescribed outputs and quantities. He need not be the fastest worker in the shop, but he should be one of the most intelligent workers and best teachers, with a keen desire to coöperate, both with the workers and with the other foremen.

The Repair Boss. — The repair boss has charge of the plant and its maintenance. He must have a natural love of order and of cleanliness, and a systematic type of mind. This position calls for a man with an experience that will enable him to detect liability of breakdowns before they actually occur. He must be resourceful in repairing unexpected breakdowns in an emergency, and be able at all times to carry out literally the directions given on the instruction cards of the Planning Department for cleaning, maintaining, and repairing the machines.

The Inspector. — The function of inspector under scientific or the Taylor plan of management is most important, especially in connection with the "first inspection." During the manufacture of the first piece and after it is finished the inspector passes and reports upon it before the worker proceeds with the other pieces. Here the worker gets a return in person for each successive act on the first piece he makes under a new instruction card, or, if he is a new worker, under an old instruction card. Ambiguity of instructions, if present, is thus eliminated, and wrong actions or results are corrected before much damage to material has been done and before much time and effort are wasted. The first erroneous cycles of work are not repeated, and the worker is promptly shown exactly how efficiently he has succeeded in determining the requirements of his instructions.

The inspector is responsible for the quality of the work. He fulfills the requirements of Schloss, who says, in speaking of the danger, under some managements, that the foreman will sacrifice quality to speed, if he gets a bonus for quantity of output, — "The best safeguard against this serious danger would be found in the appointment of a distinct staff of inspectors whose duty it should be to ascertain, as the work proceeds, that the stipulated standards of excellence are at all times scrupulously maintained." This position of inspector requires an observant man who naturally is inclined to give constructive rather than destructive-criticism. He should be a man who can coöperate with the workman and foreman to rescue condemned or damaged material with the least expenditure of time, effort and expense.

Functionalizing the Worker. — Under Scientific Management, the worker as well as the foreman, is a specialist. This he becomes by being relieved of everything that he is not best fitted to do, and allowed to concentrate upon doing, according to exact and scientifically derived methods, that work at which he is an expert.13

Relieving the Worker of the Planning. — The planning is taken away from the worker, not because it is something too choice, sacred or entertaining for him to do, or something which the managers desire to do themselves, but because it is best, for the workers themselves as well as the work, that the planning be done by specialists at planning. If he is expert enough to plan, the worker will be promoted to the planning department. In the meantime, he is working under the best plan that experts can devise.

Master Planning a Life Study. — The best planner is he who, — other things being equal, — is the most ingenious, the most experienced and the best observer. It is an art to observe; it requires persistent attention. The longer and the more the observer observes, the more details, and variables affecting details, he observes. The untrained observer could not expect to compete with one of special natural talent who has also been trained. It is not every man who is fitted by nature to observe closely, hence to plan. To observe is a condition precedent to visualizing. Practice in visualizing makes for increasing the faculty of constructive imagination. He with the best constructive imagination is the master planner.

The art of observing is founded on a study of fundamental elements. In order that planning may be done best, previous to starting work, the entire sequence of operations must be laid out, so that the ideas of value of every element of every subdivision of the process of working may be corrected to act most efficiently in relation with each and all of the subsequent parts and events that are to follow. This planning forwards and backwards demands an equipment of time study, motion study and micro-motion study records such as can be used economically only when all the planning is done in one place, with one set of records. The planner must be able to see and control the whole problem in all of its aspects.

For example, — the use that is to be made of the work after it is completed may entirely change the methods best used in doing it. Thus, the face of a brick wall that is to be plastered does not require and should not have the usual excellence of nicely ruled joints required on a face that is not to be plastered. In fact, the roughest, raggedest joints will be that quality of wall